Best Mold Remover

[azonpress_comparison id=”85″]

Best Mold Remover

mold remover

Trying to get rid of mildew and mold buildup with no progress can be frustrating. However, it seems that this issue has been taken care of by some of the best effective mold removers you can find on the market today. Most of the mold removers are specifically formulated to help you get rid of tough mold and mildew stains in no time. But finding these products may not be easy considering the fact that there are many low-quality mold removers that do not work on the market.

Even with this, there is no need to worry as this post is created to furnish you with all the important information you may need to help you make an informed decision in a short while. Read on for a detailed buying effective mold remover buying guide as well as a list of the best ones on the market.

How to Choose The Best Mold Killer

Bear in mind that the right effective mold remover and the best procedure depends on the type of material the mold is attached to before you donate your rubber gloves and spray down a gross, moldy surface. Below is a list of the best mold removers in 2021.

1. RMR-86 Instant Mold Stain & Mildew Stain Remover

The RMR-86 Instant Mold Stain & Mildew Stain Remover is one of the best mold removers you can find on the market. If you are looking to purchase a mold remover that works almost instantly to remove mold stain then this mold remover will be a great choice. The mold and mildew stain remover is available in a 32 oz bottle, 1 gallon, 128 fl oz, as well a 2.5-gallon bottle which gives you an option to go for the one that best serves your needs. The 2.5-gallon bottle is ideal if you are looking to remove stains from many different large areas. It is stated that a gallon of the mold remover will efficiently clean an area of up 40 square feet.

Best Mold Remover

You will find that the mold removal ships with a sprayer to make it easy for you to apply the liquid to the affected areas. Unlike many mold and mildew stain remover, the RMR-86 Instant Mold Stain & Mildew Stain Remover removes stain quick and easy. The maker of the mold removers stated that the spray removes mildew and mold stains in less than 15 seconds. This is made possible by the bleach-based formula of the product. Interestingly, you don’t have to sand, scrub, or brush the affected area which invariably means you won’t have to put in too much effort to restore the appearance of your environment.

Also, it can be efficiently used on different surfaces including concrete, wood, drywall, siding, tile, vinyl, and fiberglass. It is safe to use both indoor and outdoors, as well as for vehicles, boats and the likes. The manufacturer stated that the RMR-86 Instant Mold Stain & Mildew Stain Remover is 5 times stronger compared to many similar products on the market. In terms of cost, the mold and mildew remover is cheaper compared to similar products on the market and many users state that it offers a good value for money.

Most users of the RMR-86 Instant Mold Stain Remover & Mildew Stain Remover are satisfied with its performance and ease of use. However, you should note that the plastic bottle in which the product ships has been associated with some quality issues. A few users complained that the mildew remover and mold stain remover may stop working if stored for a few months. Others stated that the product does not help to remove mold and mildew stains.

2. Mold Monster – Eliminates Odor, Mold & Mildew On Fabric, Plastic, Foam And Vinyl

The second mole trap in our review is the Victor Mole Trap which is one of the best products on the market. This Mole trap is nothing short of durability and effectiveness thus forcing its way onto our review. Let’s skip the blurb and see if the product is worth it.

Just the first glance at the Mole trap will tell you that the designers meant serious business against any unfortunate Mole that gets in the path of the product. The Steel Mole Trap takes the form of a plunger with spears will inflict a deadly blow into the Moles physiology. The Mole trap is designed to be placed into the pest’s tunnel such that the trigger pan blocks part of the tunnel partially. Additionally, the Moles incorporates a safety pin which is aimed at preventing any false firings thus ensuring your safety.

Mold Monster Mold Monster Sport Mold & Odor Control Pump Spray 10oz

In terms of size, this mole trap is 4.3’’x5.4’’x14.1’’ and weighs an approximate 1.76 lbs.

The outstanding feature that the mole trapping possesses is the superior strength and reliability for getting rid of Moles. The steel build and sensitive mechanism of the mole trap should be enough to stage a one blow attack into the tunnels to kill mold almost instantly. Another advantage of the trap is that it is fairly easy to use as it is generally easy to implant within a short period of time. Additionally, the safety pin integrated into the product gives the Mole trap an edge in terms of ensuring your safety. The Mole trap is definitely a worthwhile addition to your pest control inventory.

The experience and reaction have been positive so far. The Mole Trap lives up to expectations as most of the current users are showering praises over the product.

3. Mold Armor FG51164 E-Z House Wash, Hose End Sprayer, 64-Ounce

The Wire Tek 1001 boasts of a more aesthetically built Mole trap which can be installed without the need of any drilling or digging through the ground. The feature set of the Mole trap extends its promise of superior safety standards and effectiveness. Let’s appreciate the key features of the product and see why it stands out among the best Mole traps.

The Mole trap is made of 100 percent galvanized steel providing enough strength that renders a highly effective blow to the Mole. The material also makes sure that the pest is usable in a range of soil types including loamy earth and sandy soil.

Additional features within the package include a user manual, which comes in handy if you are new to Mole traps, and a 1-year warranty which is a great pledge of quality and reliability.

The installation process of the Mole trap is quite a breeze even for a first timer. All you should do is locate the pest’s tunnel, set the trap into the tunnel until the base rests on the earth, followed by a hard step on the lever to activate the mechanism of the trap. After successful trapping, you can retrigger the lever by simply dropping the Mole trap on the ground. Apart from the easiness associated with the installation process, the Mole trap provides a durable and highly effective product that should last more than a few years while getting rid of the unwanted garden guests consistently. Another upper hand is the enhanced safety the product provides. The fact that the Mole trap can be installed independently into the tunnels and does not accommodate any sharp edges or spears makes it an ideal product especially when you have children or pets around.

On a negative note, the usual price associated with the Mole trap ensures that it comes with a pinch of salt especially when you are on a tight budget.

A diligent trek across the web shows one distinct trend associated with the Mole trap, which is within the favor of most users as demonstrated through the highly positive reactions.

4. Tilex Mildew Root Penetrator And Remover With Bleach

Next up on our review is a chemical based Mole trap designed to inflict a painless and quick death to the unsuspecting Mole known as The Underground Exterminator. The Underground Exterminator utilizes fumes which work on the cardiovascular system of the Mole thus rendering destruction right from the heart of the Moles’ life. Let’s take a deeper look at the product.

This mole trap is basically a 6.8 inch powered pipe that releases the deadly carbon monoxide gas into the Mole tunnels. Since carbon monoxide is almost a universally poisonous gas, the Mole Trap is useful for killing and getting rid of most rodents and other animals that may be infesting your garden. The pipe is connected to a vehicle exhaust pipe, with a diameter of no more than 3 inches, which powers and pressurizes the gas inside this trap for a quick release into the Mole tunnel network. In terms of the range of penetration, the product can release the gas about 275 feet.

The Mole trap’s main highlight is the revolutionary and highly effective method it uses which employs carbon monoxides destructive capability. Another advantage of the traps is that it presents a fairly humane method of killing if you are not as vengeful to the Moles because the work is done as a completely underground mission which does not require the mold removal any dead pests from a mole trap. The traps versatility is also something worth appreciating as the mechanism warrants an effort to some other unwanted guests apart from the Moles.

See also  Best Raccoon Traps And Cages

However, on a negative note, the perpetual need of a vehicle exhausts for the proper use of the trap may be a significant barrier if you simply don’t have one or when the exhaust doesn’t have an appropriate size for the Mole trap.

A critical eye across the internet told us one distinctive reaction from current users which means the Mole trap is quite a worthwhile product for the money and effort. The Mole trap lives beyond expectation and could be a great addition to every dedicated gardener’s pest control arsenal.

5. Wet And Forget 800003 Wet And Forget Moss, Mold, Mildew, & Algae Stain Remover  

If you are not the type for killing pests and bloody sights but prefer not to have any destructive visitors including Moles in your garden, Zeny has a probable solution for you. The Mold trap provides a great lure-and-cage method that enjoys high regards in different parts of the world. Let’s put it under the magnifying glass and see if it works against Moles.

The Mole trap comes in a rectangular 32”x12.5”x12” steel cage that has high rust resistant properties. The entrance of the trap is fortified by a spring-loaded door with extra sensitive triggers for a clean and safe closure once the pest gets inside the cage. Attached to the steel cage and handles are handled guards that keep your hands away from the angry and aggressive Mole trapped inside.

Additional items in the full Mole trap package include a manual that will serve the newbie a breeze through the installation.

All in all, the Mole trap proves a worthwhile rival to all the top-notch traps in the pest control world. The most notable feature is the highly humane mechanism the Mole trap employs which thrives on a simple principle; capture-it-alive and release it at the right place. Apart from this, it provides an easy option to set the trap for any beginner. Thirdly, the safety profile of the Mole trap provides enough safety for any homeowner with kids and pets around to set the trap and relax without having to be on the lookout for anyone’s safety. Lastly, the average price tag of the Mole trap accommodates all the midrange to high-end budgets. However, though there is much to appreciate, the trap has one major shortfall related to its door. Although the door of the product provides top-notch security, it is somewhat susceptible to failure when the captured Moles get more aggressive and try to escape.

A sweep across the web tells a positive story related to the Mole trap as most users have a positive experience so far. Any decision to take the trap on board definitely has a lot of backing both from the feature set it promises and the actual user experience.

Trying to get rid of mildew and mold buildup with no progress can be frustrating. However, it seems that this issue has been taken care off by some of the best mold removers you can find on the market today. Most of them are specifically formulated to help you get rid of tough mold and mildew stains in no time. But finding these products may not be easy considering the fact that there are many low-quality mold removers that do not work on the market. Even with this, there is no need to worry as this post is created to furnish you with all the important information you may need to help you make an informed decision in a short while. Read on for a detail buying mold remover buying guide as well as a list of the best ones on the market. 

mold remover

How Does Surface Types Affect Mold Removers

To ensure that it would be sufficient for the type of surface you want to clean, check the specifications or label of the mold remover.
A safe bet is often a flexible mold remover. This saves you money from having to purchase separate items, and is convenient for all.
It is easier to handle certain molds than others. For example, if mold ends up on fabrics such as curtains, you can typically throw them with the proper mold remover into a washing machine. But the work can be more difficult to remedy if the mold is under a kitchen cabinet.
Mold forms on organic surfaces and eats away. If it has drywall access, such as behind a sink cabinet, it can feed on the face of the paper and do a lot of harm. More time or labor, such as removing the cabinets, drywall, and insulation, and treating the mold in the cavity behind it, may also be needed.
In other situations, such as on the side of your house, some old-fashioned elbow grease might be everything you need. The siding can easily be sprayed with a mold remover and cleaned cleanly.

How can I tell if I have a mold problem?

Mold spores are tiny and cannot be seen. You can tell that you have a problem if the mold has grown in an area that is moist and warm. There are many different colors of mold, including orange, white, gray, green, and black. Mold usually grows in places like bathrooms, kitchens or basements because those areas have a lot of moisture. Mold is a problem when it has spores. You can’t see the spores. If you find mold in your house, it’s because there is a moist environment and mold spores are growing. Mold comes in many colors, such as orange, white, gray, green and even black. You usually will find mold in moist places like bathrooms or kitchens or basement areas

Why should mold be treated?

Mold can cause a lot of health problems. Some people have more issues than others. It’s important to get rid of the mold before it gets worse. Mold is a type of fungus that grows in places where there is water. It can make people and animals sick. Mold can cause different reactions, from minor to life-threatening. If you see mold, it is best to get rid of it right away to protect yourself and your pets from the dangers it poses.

What is the best way to prevent mold from growing?

Mold likes to grow in places that are wet. Make sure there are no leaks under your sinks, or in your basement. It is also a good idea to have a dehumidifier running during the rainy season. If you spill water on carpets or rugs, run fans so that the moisture can disappear quickly. Mold grows in moist places. If you have a leak under your sink, in your basement, or around hose bibs, then you might have mold. You should clean up the moisture so that mold doesn’t grow. You can buy a spray to keep the mold from returning as well. If you spilled something on rugs or carpets, then you need to use fans so that there is not too much moisture left on them and the mold does not come back.

Should I use products that contains bleach to clean up mold?

Most people should not use bleach on mold. It can be dangerous and it usually does not work to kill mold. Some people are allergic to mold and need bleach to get better from their allergy. People who are allergic sometimes need a professional’s help, but most people do not need bleach for their home’s milder molds. A spray with more than just straight bleach is a good choice for most people who have mold problems in their home which targets milder types of molds. In most cases, it is safer to treat a mold problem without bleach. If you are allergic to mold and it is severe, you may need a professional. When cleaning with bleach it must be mixed with other cleaners or the bleach will not work.

What  Does Mold Smell Like?

There is also a musty scent related to the growth of mold. However, often an odor can not be identified in larger rooms or areas that have other overpowering smells (like kitchens). To decide whether you have mold, don’t depend solely on the smell. Visually inspect areas and use, if appropriate, a home test kit.

How Long Does It Take To Remove Mold ?

The amount of time it takes to do their job with the best mold removers will vary from one product to the next. For others, the medication is applied once and you abandon it. Others require that after 15 minutes you reapply. Either way, once you add the mold killer, it goes to work until you brush it or wash it clean, killing the fungus.

In the case of a soapy detergent, before getting down to business, you may not let the solution sit at all. In order to loosen the mold and allow the mold killer to soak into the surface, these detergents need brushing.

mold remover
How to get rid of mold?

For homeowners, mold is a common concern, and it is something you should be able to eliminate yourself. There are a range of different cleaning products for mold removers available that you can usually apply to your bathroom, kitchen, cellar, or outdoor surfaces to destroy the bacteria there.

To lift the bacteria and avoid it from coming back, each of these cleaners need to be combined with a brush and scrubbing motion. Others should only need to be applied with water and washed away. If you have a really bad mold case, then to remove it and keep your home secure, you may need to bring a professional in. Always ensure that when removing mold, you cover furniture and keep all contaminants away from kids and pets.

See also  Best Free Cloud Storage

What Are The Different Types Of Mold?

What kind of mold you have in your home doesn’t really matter. Many mold removers are efficient at removing some of the types that are common. Some molds, however, are more hazardous than others and may require professional intervention.

In particular, black mold can be a serious concern. Its official name, Stachybotrys, is particularly harmful to the respiratory system. Usually, it needs a constant source of humidity to develop. It can easily spread from there. Through its mildew-like smell or its slimy texture, you can recognize it. It could be a smart idea to call in the pros if you are struggling with black mold.


Mold is a type of fungus that grows in wet and damp places. It can be green or brown. This type of mold is easy to identify because it has “hair.” So, if you see this kind of mold, treat it right away to avoid the problem getting worse and taking over your home. If you have an allergic reaction or asthmatic symptoms, check for this kind of mold and remove it immediately. This is the most common type of mold. It can be identified by its “hair” that is brown or green. This type of mold appears when there’s water damage. It spreads quickly, so you should check for it as soon as you see it and remove it immediately. If you have an allergic reaction or asthma symptoms, check for this type of mold and remove it immediately if found.


Acremonium is a toxic mold that can cause many health issues. It is orange, grey, pink or white in color and has a fine powdery texture. You might find it in humidifiers, cooling coils, window sills or drain pans. If you spot this mold it might be best to have it professionally removed as it is so dangerous. Acremonium is a dangerous mold. It can lead to bone marrow disease and other diseases. It has a fine, powdery texture and is orange, grey, pink or white in color. You will find them in humidifiers or drain pans. If you spot this mold, it would be best to have it professionally removed by someone who knows what they are doing because it is so unsafe.


This mold-like organism will grow on objects and surfaces that we touch often. It thrives in both cold and warm conditions, and it can also grow on moist or damp carpets, clothing and upholstery. This type of mold is not the most dangerous kind, but you still need to take care of it. You can identify this type by its brown, green or black spots. If you find this kind of mold growing at your home, do not touch it because it may cause reactions even in people who are not allergic to molds (7). This species of mold likes to grow on things we are in contact with. For example, it can grow on carpets, clothes, and furniture. This type of mold is not dangerous but can cause problems like an allergic reaction or sickness. To avoid this problem you should try not to touch it when you see it. When you find this kind of mold make sure to look for a dark spot that is brown, green or black in color.


Stachybotrys is also known as “black mold.” It’s toxic but can also cause allergies. You’ll see this type of mold on wood, cardboard, paper or wicker. If the walls of your house are made out of wood or if you have wallpaper, you might be at risk for Stachybotrys. Stachybotrys is also known as “black mold.” It is toxic but can also cause allergic reactions. Stachybotrys is easily distinguishable from other types of mold because it has a slimy texture and ranges in color from green to black. This type of mold will usually grow on wood, paper, cardboard or wicker. If your house has wooden walls or wallpaper, you might be at risk for Stachybotrys.

What is the Best Way To Prevent Mold?

mold remover

It is important to maintain the healthy atmosphere in your home after using the best mold remover and getting your home clean of mold. The molds will grow again if you are not careful and may be more difficult to manage.
To permanently get rid of the mold, it is very important to take the following steps into consideration:
Checking your house’s moisture level regularly and checking it regularly is critical. Mould grows on moisture, as mentioned earlier. If humidity levels are kept in check, the molds will not have a favorable atmosphere in which to expand. Installing de-humidifiers or a reliable air conditioning system may accomplish this.
In order not to allow the molds to enter and thrive again, it is equally necessary to repair any leaks or plumbing problems inside.
In the event of a plumbing problem, it is important to thoroughly clean your house after rectifying it, so molds will have no chance of growing.

Why Cleaning is Important To Prevent Mold ?

At your place, it is also important to have proper ventilation. Sometimes, humidity levels rise in the rainy seasons or when cleaning your home. An adequate exhaust or ventilator can help you maintain control of the humidity.

Prior to folding them, thoroughly clean and dry your clothes as these can be mold carriers.
It is necessary to remove from your house any carpet that is damp and can not be washed immediately. Even, in the humidity-rich areas of your house, rugs must not be used.
It is important to add mold inhibitors to your paint during painting, as this will help you keep molds away from your house’s walls.

It is also important to clean your bathrooms every once in a while, using mold-killing items.
It’s a good idea to scrub your roof every now and then with a roof cleaner.
Finally, you should inspect your house for the possibility of molds regularly. There are various mold test kits on the market available, and some can even be made at home. All you need to do is get your hands on the best mold test kit and conduct the test at your home in areas where mold growth is at higher risk.
Taking care of the above points would help make your home mold free and provide a safe atmosphere to live in.

Key Things to Consider When Buying the Best Mold Remover

1. Safety and Ingredient

This is the first and the most important factor that you should consider when looking to buy the best mold remover on the market. Your safety is a priority thus you should ensure that the mold and mildew removers you are about to purchase does not contain any toxic ingredient. This is especially because toxic mold removers may cause burning, irritation or other serious side effects when they come in contact with the eyes or skin.

2. Ease of Use

You should also ensure that the mold remover you want to buy is easy to use. Most products on the market ships with a sprayer that allows you to easily apply the substance on the affected areas but others do not. It is advised to go for the former as it will allow you to easily apply the substance on hard to reach areas. Also, consider going for a mold remover that does all the job. For instance, there are a few mold removers that do not require you to scrub, brush or sand the affected areas to get rid of mold and mildew stains.

3. Fast Acting

You will usually see a positive result within 10 to 15 minutes of spraying some of the best mold and mildew removers on the market. It is advised to go for these types of products and avoid those that take too long before manifesting results.

4. Price

The cost of the mold and mildew remover you are about to purchase is another important factor to consider. This is especially if you are buying on budget. Mold and mildew removers are affordable and you can purchase a high-performance mid-range product from $10 to $20. Irrespective of the cost, it is advised to go for a product that offers the best value for money.

What Are Mold and Mildew?

Mildew refers to certain kinds of mold or fungus. Molds include all species of microscopic fungi that grow in the form of multicellular filaments, called hyphae. Mildew is easily treated with a store-bought cleaner and a scrubbing brush. Mold, on the other hand, can be black or green and is often the result of a much larger infestation. To prevent mold around the tub or shower, spray the wall with an antimicrobial treatment, then seal the grout with two coats of grout sealant. If the wall is extensive and tiles come off, rebuild with cement board tile backer and new tile.

See also  Best Ultrasonic Pest Repeller

Where do Mold and Mildew Grow?

Mold can thrive in heat, dark and damp environments. Mold will grow in places with a lot of moisture, such as around leaks in roofs, windows, or pipes. Mildew and mold in a home may be due to flooding, sewage back-up from flooding in the area. Mold and mildew are fungi that thrive in moist, warm areas both inside and outside your home. Mold can grow on or fill in empty spaces and crevices of porous materials. Avoid exposing yourself or others to mold. Do not paint or caulk moldy surfaces. Mildew only refers to certain types of mold or fungus that usually appear where moisture or humidity levels are high, like shower walls, bathroom tiles or windowsills.

Why Should You Buy a Mold and Mildew Cleaner?

Mold and mildew are often spoken of together, almost as if they were the same substance. Cleaners can disinfect any surface within a fraction of seconds. DIY Mold and Mildew Removal. Hydrogen Peroxide: Mildew Cleaner Extraordinaire. Multi-layer Barrier Activates Bacterial Fighting Ingredients For Continuous Protection. The only cleanser that Comprehensive Mold Management. recommends is borax, a white powder you can purchase at most groceries in the laundry/detergent. section. For cleaning mold, mix, one cup of Borax with 1 gallon of hot water. Apply the borax solution to the area with mold. The Microban 24 Technology

What Are The Best Mold and Mildew Cleaners?

Destroy mold, pollen, & more for clean air. The best mold and mildew cleaner belongs to SKylarLIFE. If you need to consider your budget, you can opt for the Wet and Forget. Losso is a safe and effective mildew and mold cleaner that is also effective against algae and leaf stains. Wet & Forget Shower Cleaner kills bathroom mold and Mildew and keeps it from coming back. Coat your shower in Wet & forgetting once a week and let it handle mold on your shower walls, soap dishes. The Best Roof Cleaners for Mold, Mildew, and More bring your home’s roof back to its original glory by removing dark streaks, moss and other roof-hitchhiking debris.

How Often Should You Vacuum Your Home?

Vacuum based on the type of floor you have. Hard floors and tile floors should be vacuumed weekly. Carpets and rugs should be vacuuming at least two times a week. The better and more powerful your vacuum is, the easier the task will be. If pets are in the home, daily vacuum cleaning is strongly recommended to remove dirt, hair, dander, and the smaller microscopic allergens that are invisible to the naked eye. The number of times you should vacuum your home depends on lots of factors.

How to Get Rid of Mold?

To remove mold from wood cabinets, paneling, or furniture, follow the steps below. Mold on leather coats, shoes, purses, and furniture should be removed outside, if possible. Place air purifiers throughout your home to kill mold in the air. Hydrogen peroxide is another green way to get rid of mold in your shower caulk. A simple test, called the HLA-DR, can tell you if you’re genetically predisposed to get sick from mold exposure.  The only way to directly kill mold spores in the air is to use an air purifier.

What Does Black Mold Look Like?

Exposure to black mold can lead to “stachybotryotoxicosis” – a condition dangerous for young children and the elderly. The concrete wall that has been infected by black mold will look like it is covered by slimy, greenish or black patches gathering in colonies. Black mold can grow and spread on the concrete if its surface contains excessive moisture due to a water leak or if the house has recently been flooded. “Black mold” refers to several species of mold (which is a type of fungus) that have a dark green or black appearance. One such type is Stachybotrys chartarum. Long-term exposure to mold can have serious health consequences.

What is the best mold remover product?

Wiping out the mold with the best mold remover is important for maintaining a healthy household. RMR-86 is a quick and easy-to-use spray, killing mold right before your eyes. Bleach is the most used mold removal product as it is easily available and affordable. Mold Armor FG502 can be applied to hard surfaces such as tile, porcelain, plastic, linoleum, Formica. The CDC says using bleach can effectively remove mold from many surfaces but not porous ones. The Environmental Protection Agency recommends against using bleach to remove mold on porous surfaces like wood or drywall. The most popular DIY mold killer is bleach. This solution can cause discoloration on some surfaces.

When Should Biocides Be Used?

Biocides are widely used for the maintenance of required levels of hygiene at farms, slaughterhouses, and food-processing premises. They are used to protect people and animals from ‘germs’, to preserve manufactured goods, to protect industrial processes and to stop pests like rats or cockroaches used by workers in a wide… Hydrogen peroxide is used as a biocide to prevent microbial growth in water systems. The use of antimicrobials or biocide on any particular job may or may not be advisable. The technician will have to use good judgment to weigh potential benefits and potential risks. Biocide 100 is a highly effective mold cleaner against “Pathogenic” (disease causing) Fungus and Mold.

What About DIY Mold Spray?

All-natural DIY mold and mildew removal spray with essential oils make a great safe and natural option. DIY mold anything is risky, exposing yourself to toxins you don’t need more exposure to. DIY Natural Fabric Mold Removal Recipe Combine 2 teaspoons of tea tree oil, ½ of a cup of borax, and 1 cup of distilled white vinegar in a pitcher of warm water. This mixture will be too thick to spray through a squirt bottle but might be thin enough to flow through a clean agriculture sprayer. Includes a recipe for a DIY natural shower cleaner for mold prevention.

Related Posts

1 of 176